Mosi2 heating element is a kind of resistance heating element basically made of high pure Molybdenum Disilicide. In oxidizing atmosphere, a layer of compact quartz protective film is formed on the surface of Mosi2 element owing to the high-temperature combustion, which prevent Mosi2 from continuously oxidizing. In oxidizing atmosphere, its max temperature can reach 1800ºC, and its applicable temperature is 500-1700ºC. According to shape , it can be divide into "pole " "U" "W". Special shape such as right angle shape and bend angle shape can be produced according to customer's request.
Application
Silicon molybdenum rod electric heating element products are widely used in metallurgy, Research and production of steelmaking, glass, ceramics, refractory materials, crystals, electronic components, and semiconductor materials manufacturing and other fields, especially for high-performance precision ceramics, high-grade intraocular lenses, precision structural cermets Production of porcelain, glass fiber, optical fiber and high-grade alloy steel.
It can be widely used in such applications as sintering and heat treatment of ceramics, magnet, glass, metallurgy, refractory, etc.
Advantages
Mosi2 heating element can quickly form a thin and adhesive anti-oxidizing layer of quartz glass(Sio2), under the high temperature oxidizing condition. If the protective layer was damaged, the element can reform a new one, so Mosi2 heating element has a very good anti-oxidation properties, it also means that the heating element can be used on operation for a much longer time than the traditional one.
The resistivity of the Mosi2 heating element is not changing with the time, so a new one can be installed without effecting the old one, this can result of huge saving in furnace maintenance fee sand time as well, increase the working efficiency, this is the key point of Mosi2 heating element being a better material and being widely used.
Product Parameters
PHYSICAL PROPERTIS
Volume Density
|
Bend Strength
|
Vichers-hardness
|
Porosity Rate
|
Water Absortion
|
Hot Extensibility
|
| 5.5-5.6 kg/cm3 |
15-25g/cm2 |
(HV)570kg/mm2 |
7.4% |
1.2% |
4% |
Recommend surface load:
| Furnace Temp(°c) |
1400 |
1500 |
1600 |
1650 |
1700 |
| Surface load of hot zone(W/cm²) |
<18 |
<15 |
<12 |
<10 |
<8 |
CHEMICAL PROPERTIES
Oxygen -resistance under high temperature : in oxidizing atmosphere , a layer of compact quarts (sio2) protective film is formed on the surface of element owing to the high -temperature combustion , which prevent MOSI2 from continuously oxidizing .When he element temperature is higher than 1700 degree . the sio2 protective film will be fused because its fusing point is 1710 degree celsius and the sio2 is fused nto molten dropa owing to the action of its surface extension ,whic cause losing its protective ability . In the oxidizing atmosphere, when the element is continuously used , the protective film forms again .
It should be point out that element cnnot be used for rather longtime in 400-700 degree celsius . otherwise it will be powdered owing to the strong oxidizing action in low temperature .
Feature
Silicon Molybdenum Features:
1. It has anti- oxidation and automatic repair.
2.function and can be used continually in oxidative atmosphere.
3.We are using thermal processing in shape,which maintains a very good high-temperature tenacity and plasticity of the basic materials.
4.The cold and hot end welding aspect, it uses special joint technology to take shape.
5.The product has high density that greatly improves the conductivity of the product.
6.good surface quality, high mechanical strength and toughness.
Product Specification
M1700 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
M1800 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
(1). Le: Length of Hot Zone
(2). Lu: Length of Cold Zone
(3). D1: Diameter of Hot Zone
(4). D2: Diameter of Cold Zone
(5). A: Shank Spacing
Please let us know these information when you book an order for the MoSi2 muffle furnace heating element.
How to order ?
Please tell us the following data of MoSi2 rod heating element
1.d = the diameter of hot zone ?
2.c = the diameter of cold zone ?
3.Le = the length of hot zone ?
4.Lu = the length of cold zone ?
How many pcs ?
Detailed Photos
Related Product
Company Profile
1. Our company is a high & new technology enterprise specially engaged in developing, manufacturing and selling SiC (silicon carbide) heating elements and Molybdenum disilicide (Mosi2) heating elements and silicon carbide protective pipes
2. It established in the year 2007, with more than 16 years experience for produciton.
3. Products are exported to USA, Germany, France, Poland, Spain,Turkey, Russia, Ukraine, Japan, Korea, Singapore, Vietnam, Thailand and Iran, etc.. They are highly approved by our customers all over the world.
Audited Supplier 
){kind=link}