High Purity Factory Price Mosi2 Electric Heating Element Industry Furnace

• Type: Heater
• Material: Mosi2
• Form: Rod
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: MOSI2 001
• Shape: Rod
• Material Property: Brittle Material
• Temperature: High Temperature
• Oxidizability: Antioxidant
• Application: Widely
• Transport Package: Polywood Case
• Specification: 6/12 9/18 3/6 4/9
• Trademark: JIAXIN
• Origin: China
• HS Code: 69039000
• Production Capacity: 5000000
• Package Size: 100.00cm * 50.00cm * 50.00cm
• Package Gross Weight: 20.000kg

Product Description

MOSI₂ heating elements is made by comprehension production technique in domestic and abroad, meanwhile by adopting advanced producing technology. MOSI₂ heating elements is a high temperature component with MOSI₂  as its basic material . If it can be correctly use. I.E.   Combining completely  with heat model  , the highest temperature  can up to 1850⁰C.

Mosi2 heating element is a kind of resistance heating element basically made of high pure Molybdenum Disilicide. In oxidizing atmosphere, a layer of compact quartz protective film is formed on the surface of Mosi2 element owing to the high-temperature combustion, which prevent Mosi2 from continuously oxidizing. In oxidizing atmosphere, its max temperature can reach 1800ºC, and its applicable temperature is 500-1700ºC. According to shape , it can be divide into "pole " "U" "W". Special shape such as right angle shape and bend angle shape can be produced according to customer's request.

Application
It can be widely used in such applications as sintering and heat treatment of ceramics, magnet, glass, metallurgy, refractory, etc.

Advantage
Mosi2 heating element can quickly form a thin and adhesive anti-oxidizing layer of quartz glass(Sio2), under the high temperature oxidizing condition. If the protective layer was damaged, the element can reform a new one, so Mosi2 heating element has a very good anti-oxidation properties, it also means that the heating element can be used on operation for a much longer time than the traditional one.
The resistivity of the Mosi2 heating element is not changing with the time, so a new one can be installed without effecting the old one, this can result of huge saving in furnace maintenance fee sand time as well, increase the working efficiency, this is the key point of Mosi2 heating element being a better material and being widely used.

Physical and Chemical Properties of  Elements
 

Volume Density	Bend Strength	Vichers-hardness	Porosity Rate	Water Absortion	Hot Extensibility
5.5-5.6 kg/cm3	15-25g/cm2	(HV)570kg/mm2	7.4%	1.2%	4%

Chemical Properties

Oxygen-resistance under high temperature: in oxidizing atmosphere, a layer of compact quartz (SiO2) protective film is formed on the surface of element owing to the high-temperature combustion, which prevent Mosi from continuously oxidizing. When the element temperature is higher than 1700ºC, the SiO2 protective film will be fused because fused because its fusing point is 1710ºC and the SiO2 is fused into molten drops owing to the action of its surface extension, which cause losing its protective ability. In the oxidizing atmosphere, when the element is contiguously used, the protective film forms again.

It should be pointed out that element cannot be used for rather long time in 400-700ºC. Otherwise, it will be powdered owing to the strong oxidizing action in low temperature.


GM-U OUT SPECIFICATION

specification	l1	E	d1	d2	n	g
φ6/12	=or<300	40,50	12	6	35	30
	> 300	50
φ9/18	=or<300	40,50,60	18	9	45	40
	=or<300	50,60
φ4/6	>or = 50	20,25	9	4	20	18
φ3/6	>or = 50	20,25	6	3	20	18

Product Picture


Related Product


About Us

1. Our company is a high & new technology enterprise specially engaged in developing, manufacturing and selling SiC (silicon carbide) heating elements and  Molybdenum disilicide (Mosi2) heating elements and silicon carbide protective pipes and carbon fiber rod

2. It established in the year 2007, with more than 16 years experience for produciton.

3. Products are exported to USA, Germany, France, Poland, Spain,Turkey, Russia, Ukraine, Japan, Korea, Singapore, Vietnam, Thailand and Iran, etc.. They are highly approved by our customers all over the world.