Best Quality U Type Mosi2 Heater for Industry Furnace

• Type: Heater
• Material: Mosi2
• Form: Rod
• Model NO.: DX001
• Shape: Rod
• Material Property: Brittle Material
• Temperature: High
• Oxidizability: Antioxidant
• Application: Widely
• Life: Long
• Quality: Best
• Transport Package: Polywood Case
• Specification: 6/12 9/18 3/6 4/9
• Trademark: JIAXIN
• Origin: China
• HS Code: 69039000
• Production Capacity: 5000000
• Package Size: 80.00cm * 50.00cm * 30.00cm
• Package Gross Weight: 20.000kg

Product Description

Product Description

MOSI₂ heating elements is made by comprehension production technique in domestic and abroad, meanwhile by adopting advanced producing technology. MOSI₂ heating elements is a high temperature component with MOSI₂  as its basic material . If it can be correctly use. I.E.   Combining completely  with heat model  , the highest temperature  can up to 1850⁰C.

 

specification	l1	E	d1	d2	n	g
φ6/12	=or<300	40,50	12	6	35	30
	> 300	50
φ9/18	=or<300	40,50,60	18	9	45	40
	=or<300	50,60
φ4/6	>or = 50	20,25	9	4	20	18
φ3/6	>or = 50	20,25	6	3	20	18

MOSI₂ heating elements is widely used in various industries of metallurgy , glass , ceramic, magnetic materials , heat-resistant material , etc. According to shape , it can be divide into "pole " "U" "W". Special shape such as right angle shape and bend angle shape can be produced according to customer's request. Because the plasticity of element will soft above 1350⁰C .We often see "U" and "W" type . Specifications of element are φ3mm,φ4mm,φ6mm,φ9mm according to hot end diameter. The length of hot end and cold end can be adjusted within the scope of rational utilization.

Application

It can be widely used in such applications as sintering and heat treatment of ceramics, magnet, glass, metallurgy, refractory, etc.


Advantage
Mosi2 heating element can quickly form a thin and adhesive anti-oxidizing layer of quartz glass(Sio2), under the high temperature oxidizing condition. If the protective layer was damaged, the element can reform a new one, so Mosi2 heating element has a very good anti-oxidation properties, it also means that the heating element can be used on operation for a much longer time than the traditional one.
The resistivity of the Mosi2 heating element is not changing with the time, so a new one can be installed without effecting the old one, this can result of huge saving in furnace maintenance fee sand time as well, increase the working efficiency, this is the key point of Mosi2 heating element being a better material and being widely used.

Product Parameters

Physical Properties
 

Volume Density	Bend Strength	Vichers-hardness	Porosity Rate	Water Absortion	Hot Extensibility
5.5-5.6 kg/cm3	15-25g/cm2	(HV)570kg/mm2	7.4%	1.2%	4%

Chemical Properties

Oxygen-resistance under high temperature: in oxidizing atmosphere, a layer of compact quartz (SiO2) protective film is formed on the surface of element owing to the high-temperature combustion, which prevent Mosi from continuously oxidizing. When the element temperature is higher than 1700ºC, the SiO2 protective film will be fused because fused because its fusing point is 1710ºC and the SiO2 is fused into molten drops owing to the action of its surface extension, which cause losing its protective ability. In the oxidizing atmosphere, when the element is contiguously used, the protective film forms again.

 

Product Specification

Molybdenum disilicide MoSi2 rod heating element size:

1.Diameter:3/6mm;6/12mm;9/18mm;12/24mm
2.length:from 150 to 700mm,customized is available .
3. Operation temperature: from 500C to 1800.C .
4.Rod shape : straight type ;U type ; W type ;L type and other special type
5.Function: ceramic ,magnetic material,glass ,metallurgy ,fireproofing material furnace .




How to order ?

Please tell us the following data of MoSi2 rod heating element
1.d = the diameter of hot zone ?
2.c = the diameter of cold zone ?
3.Le = the length of hot zone ?
4.Lu = the length of cold zone ?
How many pcs ?
 

Our Advantages

We are a factory with more than 20 years of experience, both design capacity and production capacity are the best, we have the

most advanced equipment, the best designers and teams, for you and your products escort

The quality and price of our products are the most competitive, so that you can buy high-quality products at the same price and

enjoy high-quality service

 

Detailed Photos

 

 

Related Product

Company Profile

1. Our company is a high & new technology enterprise specially engaged in developing, manufacturing and selling SiC (silicon carbide) heating elements and  Molybdenum disilicide (Mosi2) heating elements and silicon carbide protective pipes and carbon fiber rod

2. It established in the year 2007, with more than 16 years experience for produciton.

3. Products are exported to USA, Germany, France, Poland, Spain,Turkey, Russia, Ukraine, Japan, Korea, Singapore, Vietnam, Thailand and Iran, etc.. They are highly approved by our customers all over the world.