Industrial Furnace Sic Heater for Refractory

• Certification: ISO9001
• Type: Sic Heating Element
• Material: Silicon Carbide
• Model NO.: jx001
• Form: Rod
• Shape: Rod
• Characteristic: Characteristic
• Usage: Widely
• Install: Easy
• Life: Long
• Quality: Good
• Price: Cheap
• Transport Package: Polywood Case
• Specification: as your request
• Trademark: jiaxin
• Origin: China
• Package Size: 100.00cm * 30.00cm * 50.00cm
• Package Gross Weight: 26.000kg

Product Description

Silicon Carbide Sic Heating Elements Industrial Furnace Sic Heater For Refractory


The silicon carbide heating element is a kind of non-metal high temperature electric heating element. It is made of selected super quality green silicon carbide as main material, which is made into blank, silided under high temperature and re-crystallized.

silicon carbide rod is a kind of non-mental high temperature electric heating element.It is made of selected high-purity green silicon carbide as raw material which is made into blank and silicon crystal under high temperature of 2400ºC. It can usually make use for furnance which temperature from 600C-1600ºC. It is widely used in various electric heating element of glass,chemical, electronic material and so on.
 

Material	SiC
Voltage	220 volts, 380 volts, 110 volts
Shapes	Straight type, U type, W type, and etc.
SiC Content	above 99%
Color	gray
Resistence	Uniform resistance
Power	Adjustable
Working temperature	up to 1400C

Notice for using and installing

1. Heater should be protected against damp during storing or installing to ensure the performance of the heater.
2. In order to be sure of well-distributed lod of each and groups, heater should be divided before assembling. The tolerance of the resistance of each one cannot exceed by 10% each other.
3. Heater is hard and brittle, please be careful when assembling and maintaining so as to avoid damage.
4. When operating the electric furnace at the beginning, the voltage should be increased slowly and cannot be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater.
5. When heater is damaged and need to be changed, the resistance of new one should follow the increasing resistance. If many are damaged or resistance increased too much, heater should be changed.

Application

 

It is widely used in various high temperature electric furnacesand other electric heating devices, such as in the industries of magnet, ceramics, powder metallurgy, glass, metallurgy and machinery, etc.

«Aluminum die casting 
«Laboratory furnace
«Aluminum melting and holding furnace
«Rotary hearth furnace
«Continuous furnace
«Crucible furnace for non 
«Glass Feeder ferrous metals

 

Product Parameters

 

Physical Property
 

Specific Gravity	2.6~2.8g/cm3	Bend Strength	>300kg
Hardness	>9MOH'S	Tensile Strength	>150Kg.cm3
Porosity Rate	<30%	Radiancy	0.85

Recommended surface load
 

Furnace temperature	1100	1200	1300	1350	1400	1450
Surface load of hot zone (w/cm²)	<17	<13	<9	<7	<5	<4

Chemistry Property
1.Antioxidation Property of Elements
The element start to being oxidized when heat to 800°C in air, and a SiO2 protect film will be generated in surface of hot zone when temperature get to 1000-1300°C ; cristobalite will be crystallized at 1300°C; the protect film get to a certain thickness when the temperature get go 1500°C which make the oxidation speed being very slowly to stable. if continue to heat to over 1627°C ,the protect film will be damaged and oxidation speed will be more rapid evidently and make the element damaged earlier.
Thought the element will be oxidized very slowly in course of application, it also will make the resistance increased following long time application, this phenonenon calls ageing , in order to lower the ageing speed, we use special technology to spread a protect film on the surface of hot zone in the course of production, which enhance the antioxidant property of element evidently and lengthen the service life.
2.The effects of alkali and alkaline metal oxide to elements.
The alkali and alkaline metal oxide will react with SiC at about 1300°C and generate silicate, which calls alkali-chemical corrosion, and can influence the glowing of element. 
3.The effects to elements from melting metal
Some metals ,such as cobalt, nickel, chrome and so on, can corrade the element in high temperature melting state and affect the service life of element.
Electric Property
SIC heating elements has rather large specific resistance , when it is heated in air and the surface temperature of the hot zone reaches 1050ºC, it's resistance rate is 600-1400 mm2/mm (square millimetre , its resistance value changes as the temperature rises. From room-temperature to 800ºC is negative value , over 800ºC is positive value nature curve. 

 

Product Specification

 

How to Order  Silicon Carbide Heating Element  

1. Choose the shape you need, like Rod, U, W, etc.

2. Out Diameter (OD)

3 Heating Zone Lengh (HZ)

4. Overall Length (OL)

5. Resistance you need.

Order Sample: Rod type, OD30mm, HZ300mm, OL800mm, Resistance 0.4ohms.
 

 

Diameter	Heating zone	Cold zone	Overall length	Range of resistance
	Length	Length
8mm	100-300mm	60-200mm	240-700mm	2.1-8.6 ohms
10mm	100-300mm	60-300mm	240-900mm	0.8-7.0 ohms
12mm	100-500mm	150-350mm	400-1200mm	0.7-5.6 ohms
14mm	100-500mm	150-350mm	400-1200mm	0.7-5.6 ohms
16mm	200-600mm	150-350mm	500-1600mm	0.7-4.4 ohms
18mm	200-800mm	150-400mm	500-1600mm	0.7-5.8 ohms
20mm	200-800mm	200-600mm	600-2000mm	0.6-6.0 ohms
25mm	200-1200mm	250-700mm	700-2600mm	0.4-5.0 ohms
30mm	300-2000mm	250-800mm	800-3600mm	0.4-4.0 ohms
35mm	400-2000mm	250-800mm	900-3600mm	0.5-3.6 ohms
40mm	500-2700mm	250-800mm	1000-4300mm	0.5-3.4 ohms
45mm	500-3000mm	250-750mm	1000-4500mm	0.3-3.0 ohms
50mm	600-2500mm	300-750mm	1200-4000mm	0.3-2.5 ohms
54mm	600-2500mm	300-750mm	1200-4000mm	0.3-3.0 ohms
60mm	600-2500mm	300-750mm	1200-4000mm	0.3-3.0 ohms

Detailed Photos

Test

 

Quality Control

  

Packaging & Shipping

 

 

Company Profile

 

About Us

1.Our company is a high & new technology enterprise specially engaged in developing, manufacturing and selling SiC (silicon carbide) heating elements and  Molybdenum disilicide (Mosi2) heating elements and silicon carbide protective pipes

2. It established in the year 2007, with more than 16 years experience for production.

3. Products are exported to USA, Germany, France, Poland, Spain,Turkey, Russia, Ukraine, Japan, Korea, Singapore, Vietnam, Thailand and Iran, etc.. They are highly approved by our customers all over the world.