Mosi2 Electric Heating Element for Industrial Heating Furnace

• Certification: Factory Certification
• Type: Mosi2
• Material: Mosi2
• Model NO.: jx002
• Form: Rod
• Shape: Rod
• Material Property: Brittle Material
• Temperature: High
• Oxidizability: Antioxidant
• Application: Widely
• Price: Best
• Transport Package: Polywood Case
• Specification: 3/6 4/9 6/12 9/18
• Trademark: JIAXIN
• Origin: China
• HS Code: 85168000
• Production Capacity: 5000000
• Package Size: 80.00cm * 40.00cm * 40.00cm
• Package Gross Weight: 30.000kg

Product Description

Product Description

Molybdenum disilicide (MoSi2) heating element is a resistance generate-heating component made from MoSi2 or the basic material. It is used in high temperature under the oxidizing atmosphere, it looks like glass in its surface and form a light SiO2 glass film which can protect the element not to be oxidized. So this kind of element has unique effect for resisting oxidization in the high temperature. It is used to the highest temperature up to 1800 degree celsius during oxidizing  atmosphere. According to your request, our company can produce the products of Pole, "U", "W" and "U"-right angle shapes, etc

Having the same mechanical character as other ceramic products , MOSI2 heating elements are brittle materials so that they are easy to rupture at the normal temperature , which brings some difficulties to transport and install , but it may be avoided if they were  installed and used correctly .


 Mosi2 heating element can quickly form a thin and adhesive anti-oxidizing layer of quartz glass(Sio2), under the high temperature oxidizing condition. If the protective layer was damaged, the element can reform a new one, so Mosi2 heating element has a very good anti-oxidation properties, it also means that the heating element can be used on operation for a much longer time than the traditional one.
The resistivity of the Mosi2 heating element is not changing with the time, so a new one can be installed without effecting the old one, this can result of huge saving in furnace maintenance fee sand time as well, increase the working efficiency, this is the key point of Mosi2 heating element being a better material and being widely used.
 

Product Parameters

 

PHYSICAL PROPERTIS

density	5.6g/cm^3
vickers hardness	1200kg / cm^2
porosity rate	7.4%
water absorption	1.2%
flexural strength	>15kg/cm^2
hot elongation length	4-5%

CHEMICAL PROPERTIES

Oxygen -resistance under high temperature : in oxidizing atmosphere , a layer of compact quarts (sio2) protective film is formed on the surface of element owing to the high -temperature  combustion , which prevent MOSI2 from continuously oxidizing .When he element temperature is higher than 1700 degree . the sio2  protective film will be fused  because its fusing point is 1710 degree celsius and the sio2 is fused nto molten dropa owing to the action of its surface extension ,whic cause losing its protective ability . In the oxidizing atmosphere, when the element is continuously used , the protective film forms again .
It should be point out that element cnnot be used for rather longtime in 400-700 degree celsius . otherwise it will be powdered owing to the strong oxidizing action in low temperature . 
 

Application

MoSi2 heating element can usually make use of furnace temperature from 1300 degree celsiusto 1800 degree celsius It is extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc.. It is an essential ideal element when the products are sintering in the high temperature
 

 

Website

 

 

Detailed Photos

Molybdenum disilicide MoSi2 rod heating element size:

1.Diameter:3/6mm;6/12mm;9/18mm;12/24mm
2.length:from 150 to 700mm,customized is available .
3. Operation temperature: from 500C to 1800.C .
4.Rod shape : straight type ;U type ; W type ;L type and other special type
5.Function: ceramic ,magnetic material,glass ,metallurgy ,fireproofing material furnace .
 

 

How to order ?

Please tell us the following data of MoSi2 rod heating element
1.d = the diameter of hot zone ?
2.c = the diameter of cold zone ?
3.Le = the length of hot zone ?
4.Lu = the length of cold zone ?
How many pcs ?
 

 

 

Packaging & Shipping

 

 

Related Product

 (Silicon carbide protective pipes ,Silicon-carbide (sic)heating elements,carbon fiber rod)
 

Company Profile

1. Our company is a high & new technology enterprise specially engaged in developing, manufacturing and selling SiC (silicon carbide) heating elements and  Molybdenum disilicide (Mosi2) heating elements and silicon carbide protective pipes and carbon fiber rod

2. It established in the year 2007, with more than 16 years experience for produciton.

3. Products are exported to USA, Germany, France, Poland, Spain,Turkey, Russia, Ukraine, Japan, Korea, Singapore, Vietnam, Thailand and Iran, etc.. They are highly approved by our customers all over the world.